---
title: "Asko Dishwasher Error Codes: Three Generations, Three Different Answers"
description: "Asko dishwasher error codes come in three incompatible schemes: blink patterns, F10 upward on a display, and a colon format on the Outdoor door."
url: "https://askomiami.support/blog/asko-dishwasher-error-codes-which-generation/"
date_modified: "2026-09-13"
Category: "Troubleshooting"
---


# Asko Dishwasher Error Codes: Three Generations, Three Different Answers

Three Asko dishwasher generations are in South Florida kitchens and they number their errors independently. That is not untidiness in the documentation — it is what the manuals actually say, and reading one against another is how the wrong part gets ordered.

## Start with the door edge, not the screen

Open the door and look along its edge for the model sticker. You are after something like DFI565XXL, DBI786IXXLSSOF or DOD561TXXLS. Photograph it. On this make that string is worth more than the number on the display, because it decides which of three tables the number belongs to.

## Generation one: the machine that blinks

The DW20.1 platform, sold as the 3000-series, has no display worth the name. Its errors are blink patterns across the program lights, and the F-labels — F1 through F9, then FA and FB — are a service-menu readout rather than something the machine shows you. If your machine is signaling by flashing lights in a pattern, you are here, and no F-number on the front panel exists to look up.

What the patterns mean runs from a heating stage that gave up, through overfilling and a thermistor problem, to a blocked filter and a circulation problem. Two of those are cleared by lifting the filter stack out and rinsing it.

## Generation two: the display machines

The current line prints F10 upward on a full-text panel: F10 and F54 for overfilling, F11 and F68 for getting water out, F12 and F67 for getting it in, F40 for an inlet valve that leaks while off, F41 for heating, F45 for the diverter, F52 for water level with its own instruction to clean the filters, and F56 for the circulation pump.

Note what is missing. F13 to F39, F42 to F44, F46 to F51 and most of the fifties and sixties appear in no consumer manual anywhere. They are almost certainly defined only in Asko's internal service documentation. Anything online that decodes them confidently is not reading a manual.

## Generation three: the Outdoor door

Built for a terrace and therefore common on this coast, the DOD Outdoor machine uses a colon format and its own service scheme. It is not a variation of the indoor list. Its numbers collide with the display generation and mean other things:

- F:10 — temperature stop, where F10 indoors is an overfill- F:11 — inlet valve leakage, where F11 indoors is drainage- F:12 — overfilling, where F12 indoors is a failure to fill- F:41 — the door is open, where F41 indoors is heating

Four collisions in the first five numbers. That is why the terrace machine gets its own pages here.

## What to do with the number once you have it

Write down the model code and the exact characters, including whether there is a colon. Then do the free checks that apply to almost every one of these: lift the filter stack out and rinse it, check the service valve under the sink is fully open, and look at whether the drain hose is crushed behind the cabinet. A good share of the codes above are cleared by one of those three.

---

**[Read full article: Asko Dishwasher Error Codes: Three Generations, Three Different Answers](https://askomiami.support/blog/asko-dishwasher-error-codes-which-generation/)**