--- title: "Dishwasher error code F10" description: "Asko dishwasher error code F10: The machine has taken on more water than it wanted and has stopped rather than carry on." url: "https://askomiami.support/error-codes/dishwasher-f10/" date_modified: "2026-09-13" Appliance type: "Dishwashers" --- # Dishwasher error code F10 ### What F10 means on this make The machine has taken on more water than it wanted and has stopped rather than carry on. On an integrated dishwasher that decision is worth being grateful for, because the alternative arrives on the joinery floor. The usual causes are an inlet valve that is not closing cleanly and a level sensor reading low, and those are opposite problems with the same code. On a DW Outdoor door this string is written F:10 and means something else entirely. ### Where this appears, and which table it belongs to On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all. ### Which machines this one applies to DFI5558, DSD746, DBI675 and the D-series display machines. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 8 of the appliance types this site publishes — cooktop, dishwasher, dryer, microwave, oven, range, refrigerator and washer — and publishes none at all for commercial line, freezer, microwave, oven, range, range hood and refrigerator. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door. ### What to do about it - Turn off the service valve under the sink and leave the machine off until it is looked at. - Check under the toe kick for water in the base tray — a wet tray moves this from a sensor question to a leak. - The inlet valve and the level sensor are both testable parts; neither is guessed at. ### Where this goes next The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-1406](tel:+13053631406) and describe what the panel is doing before booking anything. DFI5558, DSD746, DBI675 and the D-series display machines What this one means What F10 means on this make The machine has taken on more water than it wanted and has stopped rather than carry on. On an integrated dishwasher that decision is worth being grateful for, because the alternative arrives on the joinery floor. The usual causes are an inlet valve that is not closing cleanly and a level sensor reading low, and those are opposite problems with the same code. On a DW Outdoor door this string is written F:10 and means something else entirely. Where this appears, and which table it belongs to On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all. Which machines this one applies to DFI5558, DSD746, DBI675 and the D-series display machines. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 8 of the appliance types this site publishes — cooktop, dishwasher, dryer, microwave, oven, range, refrigerator and washer — and publishes none at all for commercial line, freezer, microwave, oven, range, range hood and refrigerator. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door. What to do about it Turn off the service valve under the sink and leave the machine off until it is looked at. Check under the toe kick for water in the base tray — a wet tray moves this from a sensor question to a leak. The inlet valve and the level sensor are both testable parts; neither is guessed at. Where this goes next The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-1406](tel:+13053631406) and describe what the panel is doing before booking anything. --- **[Read full article: Dishwasher error code F10](https://askomiami.support/error-codes/dishwasher-f10/)**