---
title: "Dishwasher error code F68"
description: "Asko dishwasher error code F68: This is more specific than F11: rather than reporting that water did not leave, the control is reporting that the drain pump…"
url: "https://askomiami.support/error-codes/dishwasher-f68/"
date_modified: "2026-09-13"
Appliance type: "Dishwashers"
---


# Dishwasher error code F68

### What F68 means on this make

This is more specific than F11: rather than reporting that water did not leave, the control is reporting that the drain pump is not behaving electrically as it should. A blockage can still produce it — a pump straining against something jammed in the impeller draws wrongly — so the filter comes out first even here.

### Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

### Which machines this one applies to

DFI5558, DSD746, DBI675 and the D-series display machines. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 8 of the appliance types this site publishes — cooktop, dishwasher, dryer, microwave, oven, range, refrigerator and washer — and publishes none at all for commercial line, freezer, microwave, oven, range, range hood and refrigerator. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

### What to do about it

- Clear the pump filter and check the impeller turns freely by hand with the power off.
- If it is clear and free, the pump is the part and it is measured before it is replaced.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-1406](tel:+13053631406) and describe what the panel is doing before booking anything.

DFI5558, DSD746, DBI675 and the D-series display machines

What this one means

What F68 means on this make

This is more specific than F11: rather than reporting that water did not leave, the control is reporting that the drain pump is not behaving electrically as it should. A blockage can still produce it — a pump straining against something jammed in the impeller draws wrongly — so the filter comes out first even here.

Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

Which machines this one applies to

DFI5558, DSD746, DBI675 and the D-series display machines. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 8 of the appliance types this site publishes — cooktop, dishwasher, dryer, microwave, oven, range, refrigerator and washer — and publishes none at all for commercial line, freezer, microwave, oven, range, range hood and refrigerator. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

What to do about it

Clear the pump filter and check the impeller turns freely by hand with the power off.

If it is clear and free, the pump is the part and it is measured before it is replaced.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-1406](tel:+13053631406) and describe what the panel is doing before booking anything.

---

**[Read full article: Dishwasher error code F68](https://askomiami.support/error-codes/dishwasher-f68/)**