---
title: "Dryer error code L4"
description: "Asko dryer error code L4: The TD70 platform changed its code form across revisions — L-numbers, then F-numbers, then S-numbers, then J1 and LCD strings — for…"
url: "https://askomiami.support/error-codes/dryer-l4/"
date_modified: "2026-09-13"
Appliance type: "Dryers"
---


# Dryer error code L4

### What L4 means on this make

The TD70 platform changed its code form across revisions — L-numbers, then F-numbers, then S-numbers, then J1 and LCD strings — for the same machine family. The revision is part of the reading. The simplest message on the platform: the water container is full, or the switch that detects it is stuck. Emptying it settles which. On a machine plumbed to a drain instead, the same switch reports a drain that is not clearing.

### Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

### Which machines this one applies to

TD70.1 Type A. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 8 of the appliance types this site publishes — cooktop, dishwasher, dryer, microwave, oven, range, refrigerator and washer — and publishes none at all for commercial line, freezer, microwave, oven, range, range hood and refrigerator. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

### What to do about it

- Empty the container and reseat it fully.
- If it repeats with an empty container, the microswitch is the part.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-1406](tel:+13053631406) and describe what the panel is doing before booking anything.

TD70.1 Type A

What this one means

What L4 means on this make

The TD70 platform changed its code form across revisions — L-numbers, then F-numbers, then S-numbers, then J1 and LCD strings — for the same machine family. The revision is part of the reading. The simplest message on the platform: the water container is full, or the switch that detects it is stuck. Emptying it settles which. On a machine plumbed to a drain instead, the same switch reports a drain that is not clearing.

Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

Which machines this one applies to

TD70.1 Type A. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 8 of the appliance types this site publishes — cooktop, dishwasher, dryer, microwave, oven, range, refrigerator and washer — and publishes none at all for commercial line, freezer, microwave, oven, range, range hood and refrigerator. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

What to do about it

Empty the container and reseat it fully.

If it repeats with an empty container, the microswitch is the part.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-1406](tel:+13053631406) and describe what the panel is doing before booking anything.

---

**[Read full article: Dryer error code L4](https://askomiami.support/error-codes/dryer-l4/)**