---
title: "Washer not spinning repair"
description: "A load that comes out soaked after a cycle that appeared to finish. Before anything is priced, three free things are eliminated because they account for most of these: the"
url: "https://askomiami.support/services/washer-not-spinning-repair/"
date_modified: "2026-09-13"
Appliance type: "Washers"
---


# Asko washer not spinning repair

### One test on an empty drum separates three causes

Three things close most of these and none of them costs anything — drainage, balance and the program chosen — run a spin-only cycle with the drum empty and write down what happens. What is left is mechanical: the door lock the machine must confirm before it will spin, the motor and its control, or shock absorbers worn far enough that the balance check gives up before the drum ever reaches speed. That last one matters beyond this repair, because the extra travel it allows is what takes a drum bearing out early.

What this involves

Drain, balance and program eliminated before anything mechanical is opened

The door lock is a spin interlock — a worn one stops the machine dead

Shock absorbers and suspension, which fail slowly and look like electronics

Prove it has drained

A spin-only program on an empty drum. If that works, the problem is in draining or balancing, and this becomes a much cheaper visit.

Check the interlock and the motor circuit

Door lock tested electrically, motor and its control read under load, brushes checked where the platform has them.

Look at what carries the drum

Shock absorbers, springs and bearing play. A drum that moves too far never satisfies the balance check, and the machine gives up rather than reporting anything.

### It spins slowly rather than not at all.

A different complaint, and worth saying which you have. Slow spin points at the motor control or the drive; no spin at all points at drainage, balance or the door lock.

### Is one heavy item really enough to stop it?

Yes, and the machine is behaving correctly when it happens. It will try up to ten times to redistribute the load and then finish the program without spinning. If it happens on ordinary mixed loads too, the suspension is the next thing to look at.

---

**[Read full article: Washer not spinning repair](https://askomiami.support/services/washer-not-spinning-repair/)**