--- title: "Dishwasher leaking" description: "Water appearing at the toe kick, which on an integrated machine is almost never where the leak started — it tracks along the frame and comes out at the front." url: "https://askomiami.support/symptoms/dishwasher-leaking/" date_modified: "2026-09-13" Appliance type: "Dishwashers" --- # Asko dishwasher leaking ### What to do in the next ten minutes Turn the service valve under the sink off and switch the machine off at the wall. Pull the toe kick away and look into the base: standing water there means the tray has been catching it for a while. Put a towel down, do not run another program to test it, and note whether the water appeared during fill, during wash or at the end — each points at a different part and it is the one thing only you can observe. ### Why the panel comes off first An integrated dishwasher sits inside joinery that was built around it, and water inside that box has one way out: forward, along the frame, under the toe kick. So the puddle tells you almost nothing about the source. The sequence that works is dull and reliable — isolate, remove the custom door, bring the machine out, then run each phase separately and watch. Anything faster than that is a guess with a part attached. ### What a slow leak costs in a condominium A door seal that has been cutting for a month puts water into a floor slab, and in a building that stops being a dishwasher repair and becomes several units’ problem. It is the reason we say to stop using the machine rather than to run it carefully until somebody can come — the machine holds several gallons and a program will use all of them. The door seal has cut or set Grit collects in the bottom fold and works into the rubber. It leaks at the bottom corners first, usually during the wash phase when the water is being thrown about. A hose union or the sump has let go Behind the machine and invisible from the front. This is the one that soaks the joinery floor for weeks before anything shows, and it is why we look at the carcass as well as the appliance. The inlet valve is passing while off Water arriving when the machine is not asking for it fills it overnight. On this make there is a dedicated message for exactly that, and it should be treated as urgent. When does the water appear? Fill, wash or drain. Each phase pressurizes a different part of the machine, and a leak that shows in only one of the three is half diagnosed already. Is the base tray wet? Toe kick off, torch in. A dry tray moves this towards a door seal; a wet one means it has been running underneath for some time. What does the cabinet floor look like? Swollen chipboard or a dark line at the back is a separate problem from the appliance, and it is better found now than after the repair. Water on the floor, and the machine is behind a panel What it usually means An overfill message with a wet base tray is a leak, not a sensor Turn the water off at the sink and stop using the machine Where it shows at the front is not where it started What to do in the next ten minutes Turn the service valve under the sink off and switch the machine off at the wall. Pull the toe kick away and look into the base: standing water there means the tray has been catching it for a while. Put a towel down, do not run another program to test it, and note whether the water appeared during fill, during wash or at the end — each points at a different part and it is the one thing only you can observe. Why the panel comes off first An integrated dishwasher sits inside joinery that was built around it, and water inside that box has one way out: forward, along the frame, under the toe kick. So the puddle tells you almost nothing about the source. The sequence that works is dull and reliable — isolate, remove the custom door, bring the machine out, then run each phase separately and watch. Anything faster than that is a guess with a part attached. What a slow leak costs in a condominium A door seal that has been cutting for a month puts water into a floor slab, and in a building that stops being a dishwasher repair and becomes several units’ problem. It is the reason we say to stop using the machine rather than to run it carefully until somebody can come — the machine holds several gallons and a program will use all of them. ### Can I keep using it until you come? No. A leak that has reached the tray will reach the floor, and the cost of the days in between is out of all proportion to the repair. ### There is water but no message at all. Common, and it does not mean anything is fine. The base float only lifts when water collects in the tray; a leak at the door or at a hose behind the machine never touches it. --- **[Read full article: Dishwasher leaking](https://askomiami.support/symptoms/dishwasher-leaking/)**