---
title: "Dishwasher will not start"
description: "Dead silence, and on an integrated machine the prime suspect is mechanical rather than electrical: is the door. A custom panel adds weight the hinge springs were set for on"
url: "https://askomiami.support/symptoms/dishwasher-will-not-start/"
date_modified: "2026-09-13"
Appliance type: "Dishwashers"
---


# Asko dishwasher will not start

### What to do in the next ten minutes

Press the door closed until you hear the latch, then start the program again. Check no delay start is set — it is easy to leave on and it produces this complaint exactly. Look at whether anything else on that circuit has power, and if the machine can be reached, check the plug behind the cabinet is home. If the panel is completely dark, that is a different problem from a panel that lights up and does nothing.

### Why the door is a circuit

A dishwasher will not run unless it is satisfied the door is shut, and it decides that with a switch rather than with a latch. The two usually agree, but not always: a latch can click while the switch stays open, and on an integrated machine carrying a heavy custom panel that gap opens up slowly as the hinges wear. The component is inexpensive and the adjustment routine — well worth catching before the door itself starts to drop.

### What we bring for this one

Because the likely causes span a hinge, a switch, a supply and a board, the visit starts with measurements rather than parts. Power at the machine, continuity at the door switch, then the control. It usually ends at the first or second of those, which is the reason we do not quote a board on the telephone for a machine that will not start.

The door is not satisfying its switch

On integrated machines nothing else comes close. Springs tensioned for a lighter panel, or hinges that have settled, leave the latch fractionally short of its switch.

The machine has no power

A tripped breaker, a socket behind the cabinet that has worked loose, or a switched spur somebody turned off during other work.

The control is not responding

Panel dead, supply proven live. This one costs the most and therefore comes last in the order of work, never first.

Does the panel light at all?

A lit panel doing nothing is a wholly different case from a dead one. We open with that question because answering it is free.

Is a delay start set?

Find the clock or delay indicator on the panel. Plenty of these calls end here, and nobody should feel foolish about it.

Does the door need a push?

If it has needed a firmer push for months, the hinge has been telling you this was coming.

The door shuts, the program is chosen, and nothing happens

What it usually means

Push the door firmly and try again — on an integrated machine this is the usual answer

A delay start nobody cleared behaves precisely like a dead machine

Check the socket behind the cabinet, which nobody can see

What to do in the next ten minutes

Press the door closed until you hear the latch, then start the program again. Check no delay start is set — it is easy to leave on and it produces this complaint exactly. Look at whether anything else on that circuit has power, and if the machine can be reached, check the plug behind the cabinet is home. If the panel is completely dark, that is a different problem from a panel that lights up and does nothing.

Why the door is a circuit

A dishwasher will not run unless it is satisfied the door is shut, and it decides that with a switch rather than with a latch. The two usually agree, but not always: a latch can click while the switch stays open, and on an integrated machine carrying a heavy custom panel that gap opens up slowly as the hinges wear. The component is inexpensive and the adjustment routine — well worth catching before the door itself starts to drop.

What we bring for this one

Because the likely causes span a hinge, a switch, a supply and a board, the visit starts with measurements rather than parts. Power at the machine, continuity at the door switch, then the control. It usually ends at the first or second of those, which is the reason we do not quote a board on the telephone for a machine that will not start.

### It started once after I slammed it.

That is the door switch telling you plainly. It will get worse, and the part is small.

### Should I reset it at the breaker?

Worth one try — off for a full minute, then on. A control that comes back after that and stays working for months was probably reacting to something else entirely.

---

**[Read full article: Dishwasher will not start](https://askomiami.support/symptoms/dishwasher-will-not-start/)**