Service
Asko cooktop glass replacement
A cracked or shattered induction top, which is not a cosmetic repair and should not be treated as one. A crack lets moisture down onto the coils and the board beneath, and the failure that follows is electrical. The right first action is to stop using it and isolate it at the breaker. Whether it is worth replacing depends on the model and on what has already got through, and on a hob no longer in the US catalog it depends on the glass still being available — which we check before quoting.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
Before you read on
What this job costs and how it is agreed
A starting figure, not a quote. What moves it is the model, how the unit is built in and which part it needs — settled after the on-site diagnostic.
Starts at
from $275
After a diagnostic from $95, which comes off the bill when you go ahead.
or call (305) 363-1406
Diagnostic
From $95, credited to the repair
The price
In writing, before anything is opened
Warranty
On the labor we performed
On the visit
How this visit actually goes
The same order every time, so nothing is opened and nothing is charged before you have seen the figure and said yes.
-
01
Isolate and assess the ingress
Power off at the breaker, then the underside inspected for what has reached the coils and the board. That finding decides whether this is a glass job at all.
-
02
Confirm the part exists before pricing
The glass sourced against the exact model, with its lead time, and the answer given before anything is committed.
-
03
Fit, seal and test every zone
Sealed to the stone properly and all zones run, because a hob assembled around a new top still has to be proved as a whole.
Applies to
The Asko units we carry this work out on
-
Induction and gas · two code families that do not overlap Asko cooktop repair in Miami
Asko calls them hobs, which is the first thing to know when you go looking for a manual, and there are none in the current US catalog — the ones here were fitted when there were. Induction is the majority, and the codes split cleanly into two families that share no numbers: the HI1655M generation prints F-codes, F00 and F0 through F9 with FA, FC and F99 among them, and the HI1621G generation prints E and Er strings instead, up to Er47 and U400. The two are not versions of one table, and a meaning taken from the wrong family is a wrong part. Gas hobs on this make publish no codes at all, which makes them the simpler call and not the lesser one.
- Induction hobs in two code families — F-series and E/Er-series, no overlap
- Gas hobs publish no codes: diagnosis is by flame, ignition and gas train
- Glass, trim and the cut in the stone decide the access before any part is named
In more detail
About Asko cooktop glass replacement
Not cosmetic, and the availability question comes first
A crack breaks the seal between the cooking surface and the electronics beneath it, so spills and steam travel down onto the coils and the board. The failure that follows is electrical and it does not announce itself first, which is why the advice is to stop using the hob and open the circuit rather than the control panel. Two things are established before a figure is quoted: what has already got through, which decides whether this is a glass job or a glass and electronics job, and whether the panel for that exact model can still be sourced.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about Asko cooktop glass replacement
It is only a hairline crack.
It works today. The mechanism is what passes through it over the following weeks — a boil-over, a wiped surface, steam — and the electronics beneath are not sealed against any of it.
How did it crack? Nothing was dropped.
Often nothing was. Thermal shock does it: a cold wet cloth on a hot zone, a pan boiled dry and then moved. Occasionally it is the installation, where a top was clamped into stone with no room to expand — and that is worth correcting, or the new one goes the same way.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name